{"product_id":"autoclave-tecno-gaz-europa-b-evo-classe-b-15-lt","title":"Tecno Gaz Europa B EVO Autoclave - Class B 15 L","description":"\u003cp\u003e\u003cstrong\u003eEuropa B Evo is an autoclave developed through a collaboration between Tecno-Gaz’s research department and other major external development facilities.\u003c\/strong\u003e\u003cbr\u003eEuropa B Evo is indispensable in all medical and dental facilities and all sectors requiring safe sterilization of all materials:\u003cbr\u003ehollow, porous, solid, unwrapped and wrapped.\u003cbr\u003eEuropa B Evo represents the continuity of a success that Tecno-Gaz has enjoyed for years; in fact, thousands of professionals use Tecno-Gaz autoclaves with great satisfaction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplied safety features\u003c\/strong\u003e\u003cbr\u003e- Certified safety valve.\u003cbr\u003e- PED on sterilization chambers.\u003cbr\u003e- Chamber insulation with certified ceramic material.\u003cbr\u003e- The new control panel with a blue display has a striking aesthetic impact and great modernity.\u003cbr\u003e- The new filling connections, which fit flush with the front of the autoclave, represent a true innovation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEuropa B Evo is indispensable in all medical and dental facilities and in all sectors where safe sterilization is required for all materials, hollow, porous, solid, unwrapped and wrapped.\u003c\/strong\u003e\u003cbr\u003eEuropa B Evo is the continuity of a success that Tecno-Gaz has enjoyed for years; in fact, thousands of professionals use Tecno-Gaz autoclaves with great satisfaction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEuropa B Evo features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Circular chamber in treated AISI 304 stainless steel\u003cbr\u003e- Maximum load per cycle: 5 kg\u003cbr\u003e- 3 door safety features: electromagnetic, electrical, and dynamic\u003cbr\u003e- Control board integrated into the panel\u003cbr\u003e- Graphic display\u003cbr\u003e- Automatic pressure alignment system\u003cbr\u003e- Water filling with pump system and automatic full-tank stop\u003cbr\u003e- Door gasket to ensure maximum durability\u003cbr\u003e- Rear panel preparation, with the option for automatic water filling and drainage\u003cbr\u003e- Forced ventilation system integrated into the unit\u003cbr\u003e- Protected tray holder that prevents contact between the load and the chamber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe P.I.D. system\u003c\/strong\u003e\u003cbr\u003eThe primary commitment of a company like Tecno-Gaz is to create a product with unique solutions, features, and characteristics that ensure maximum reliability and safety for the user.\u003cbr\u003eOur research departments, with the support and collaboration of external bodies, have created an extraordinary system that has been applied for the first time to our autoclaves; this innovative device is the P.I.D.\u003cbr\u003eP.I.D. is an acronym for Proportional-Integral-Derivative and is the ultimate expression of closed-loop control. The structure of this sophisticated control is simple and flexible. P.I.D. ensures constant control and monitoring of the autoclave's entire functional system, intervening automatically in the event of anomalies regarding incorrect technical and electronic parameters.\u003cbr\u003eA device that acts like \"a real technician\" with diagnostic and real-time intervention capabilities.\u003cbr\u003eA solution that limits anomalies and alarms, ensuring maximum reliability and minimizing any machine downtime.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSterilization\u003c\/strong\u003e\u003cbr\u003eAutoclaves capable of sterilizing Type B loads\u003c\/p\u003e\n\u003cp\u003eThere are many models of autoclaves with different characteristics and features.\u003cbr\u003eEvery medical facility or practice must adopt the model most suitable for its operational needs, as dictated by the loads it needs to sterilize.\u003cbr\u003eRegarding loads, EN 13060 has precisely defined the classification, clarifying that the following materials are considered Type B loads:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePorous bodies\u003c\/strong\u003e\u003cbr\u003ePorous bodies are simple or composite materials that can absorb fluids (fabrics, gowns, gauze, dressings, etc...)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHollow bodies\u003c\/strong\u003e\u003cbr\u003eHollow bodies are materials or devices with cavities, obstructions, etc. These are divided into two classes defined precisely through a careful description of the ratio between length and diameter.\u003cbr\u003eWe set out below some general reference concepts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType B:\u003c\/strong\u003e cannulas, tubes, or devices with significant passages\u003cbr\u003e\u003cstrong\u003eType A:\u003c\/strong\u003e turbines, handpieces, and devices with blind holes or small dimensions.\u003cbr\u003eGiven this, it is evident that all facilities where the aforementioned materials are used must opt for a state-of-the-art autoclave capable of ensuring safe sterilization for Type B loads. Tecno-Gaz S.p.A. produces a wide range of autoclaves that can guarantee the correct sterilization of all types of materials, particularly Type B loads:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEuropa B Evo: the autoclave with a fractionated vacuum system, complete with various devices.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAutoclaves that guarantee safe sterilization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstantly monitored cycles\u003c\/strong\u003e\u003cbr\u003eThe Europa B Evo – Europa B Evo 24 autoclave line comes complete with a device for constant control and monitoring of sterilization cycles. Any type of anomaly is detected, and if it compromises the sterilization cycle, the unit is immediately blocked and the anomaly is displayed via a message.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixed, non-tamperable cycles\u003c\/strong\u003e\u003cbr\u003eAll cycles are fixed and always ensure the safe sterilization of the treated materials. There is no possibility for operators to intervene or tamper with the cycles, which avoids any type of possible human error.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll cycles ensure the sterilization of Type B loads\u003c\/strong\u003e\u003cbr\u003eAll sterilization cycles have the fractionated vacuum system, controls, and parameters that ensure the sterilization of Type B loads. Even an incorrect selection of the desired cycle always ensures safe sterilization on any type of material treated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eErgonomics and ease of use\u003c\/strong\u003e\u003cbr\u003eJust press one button to select the cycle and another button to start the complete process.\u003cbr\u003eIt is impossible to make mistakes, impossible to select a cycle that does not ensure correct sterilization; any operational error is signaled via error messages.\u003cbr\u003eThe autoclave can be used by multiple people without the possibility of causing damage or problems. Tecno-Gaz has sought to provide maximum operational safety in this important aspect as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe sterilization process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe sterilization process consists of several phases, and for each point, Tecno-Gaz has chosen to adopt cutting-edge technical solutions.\u003c\/p\u003e\n\u003cp\u003eVacuum is the first phase of the cycle and is crucial for correct sterilization. We ensure an excellent result by adopting a high-quality pump that allows for the removal of air pockets even in hollow and porous bodies.\u003cbr\u003ePreheating is the phase in which the sterilization cycle parameters—temperature and pressure—are stabilized. We adopt a preheating system with a heating element designed to minimize the duration of this phase.\u003cbr\u003eExposure time is the period during which all microorganisms are eradicated; pressure, temperature, and time must be monitored perfectly. We can count on a double-probe system and microprocessor control, further managed by the exclusive P.I.D. system.\u003cbr\u003eDrying is the important final phase of the sterilization cycle. Perfect drying ensures the sterile maintenance of the instruments. Tecno-Gaz adopts a combined vacuum + heat system that ensures perfect drying of the sterilized materials, both unwrapped and wrapped.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe importance of vacuum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhy vacuum\u003cbr\u003eAfter finishing loading the autoclave and closing the door, ambient air is trapped inside the chamber, which, due to different physical elasticity, does not mix with the steam produced. These \"air pockets\" remain \"cold,\" therefore they are an impediment to the correct and safe sterilization of the treated materials. It is important to adopt a forced expulsion system for these air pockets.\u003c\/p\u003e\n\u003cp\u003eVacuum systems\u003cbr\u003eThere are several vacuum systems applicable to autoclaves. The most advanced and safe vacuum method to achieve safe sterilization on all materials, including hollow and porous ones, is the fractionated vacuum.\u003c\/p\u003e\n\u003cp\u003eFractionated vacuum\u003cbr\u003eEuropa B Evo – Europa B Evo 24 adopt the fractionated vacuum system. The fractionated vacuum is a system that alternates phases of negative pressure with phases of positive pressure and is implemented at the start of each sterilization cycle. This method is the ultimate technical expression of vacuum and ensures the expulsion of air pockets in all materials, even in hollow and porous ones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCycles\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFixed temperatures\u003c\/strong\u003e\u003cbr\u003eThe temperatures set on our autoclave cycles are 134°C and 121°C. The 134°C cycles are normally used for the sterilization of solid and ferrous materials. The 121°C cycles are used for thermoplastics, fabrics, and sensitive materials. Always sterilize materials by following the indications provided by the device manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimplicity of use\u003c\/strong\u003e\u003cbr\u003eChoosing and selecting a sterilization cycle on Tecno-Gaz autoclaves is very simple and intuitive. One key allows you to scroll and view data relating to each cycle on the large display, allowing you to identify the most suitable cycle; then, it is sufficient to press one button to automatically start the entire sterilization cycle without having to worry about anything else. For any error or alarm, messages and LED indicators will call your attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompletely automatic cycles\u003c\/strong\u003e\u003cbr\u003eAll cycles are completely automatic; all phases are managed by an advanced board complete with a powerful microprocessor. Every phase (vacuum, preheating, exposure time, drying) is monitored, supported, and managed automatically. There is no human involvement in the execution of the cycles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWide range of operating cycles\u003c\/strong\u003e\u003cbr\u003eEuropa B Evo and Europa B Evo 24 autoclaves are equipped with:\u003cbr\u003e1 sterilization cycle at 134°C for unwrapped and wrapped materials.\u003cbr\u003e1 sterilization cycle at 121°C for unwrapped and wrapped materials.\u003cbr\u003e1 flash sterilization cycle for rapid cycles.\u003cbr\u003e1 specific prion sterilization cycle for C\u0026amp;J disease.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperator-free cycles with automatic shutdown\u003c\/strong\u003e\u003cbr\u003eAll sterilization cycles have an automatic function that, in the absence of an operator at the end of the cycle, starts an anti-condensation phase and an automatic shutdown. This system saves energy and keeps the equipment safe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest cycles\u003c\/strong\u003e\u003cbr\u003eOur autoclaves come complete with test cycles for periodic control of the equipment using physical and functional systems.\u003cbr\u003eHelix test to evaluate vacuum capability in porous bodies.\u003cbr\u003eBowie \u0026amp; Dick test to evaluate vacuum capability in bodies.\u003cbr\u003eVacuum test to evaluate the vacuum maintenance capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety for operators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoor safety\u003c\/strong\u003e\u003cbr\u003eWe have applied three safety devices to the door:\u003cbr\u003eThe first is mechanical-electromagnetic: it activates the moment the sterilization cycle is started and completely blocks the door from opening. This device can be released at the end of the cycle by activating a specific button, and only when positive pressure is close to zero.\u003cbr\u003eThe second is electrical: it activates automatically the moment there is a clear attempt at forced opening of the machine.\u003cbr\u003eThe third is dynamic: the gasket is made with a new concept that does not allow the door to open in case of pressure inside the chamber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplied safety features\u003c\/strong\u003e\u003cbr\u003eCertified safety valve.\u003cbr\u003ePED on sterilization chambers.\u003cbr\u003eChamber insulation with certified ceramic material.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFlexible autoclaves\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a leading company like ours, the first objective is to create \"flexible\" devices that can be adapted to the individual needs of operators to allow for operational ease and savings in time and money. During the project development phase, it becomes a priority for our technicians to study technical solutions that can guarantee this all-important feature. The Europa B Evo – Europa B Evo 24 autoclaves can count on a series of solutions that allow the operator to set up the autoclave according to their own operational needs.\u003c\/p\u003e\n\u003cp\u003eWater tank filling: prepare your autoclaves according to your needs\u003cbr\u003eYou can choose how to set up your autoclave.\u003cbr\u003eEuropa B Evo is already ready to:\u003cbr\u003eHave autonomous operation, using the water from the internal tanks and manually loading\/unloading pure and used water.\u003cbr\u003eBe connected directly to the water mains, via a specific reverse osmosis system (mod. Pura), to have a continuous water supply and automatic drainage, without wasting time on manual operations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAdvice\u003c\/strong\u003e\u003cbr\u003eFor those who use the autoclave constantly and do not want the implications related to purchasing distilled water and managing tank filling and drainage, we recommend adopting the Pura system; you will save time and money and protect the autoclave because you will always have controlled and suitable water.\u003c\/p\u003e\n\u003cp\u003eInternal machine tanks\u003cbr\u003eAll autoclaves have a pure water tank and a used water tank inside the unit. Each tank is equipped with sensors to signal minimum and maximum levels.\u003c\/p\u003e\n\u003cp\u003eFilling the tanks\u003cbr\u003eIf the autoclave is connected to the mod. Pura device, the tanks fill automatically, whereas if you intend to use it autonomously, water filling is done manually. Tecno-Gaz autoclaves, to facilitate this operation, are equipped with a filling method using a pump and a full-tank detection system that stops the water flow. This important option, standard on all models in the line, avoids human error due to overfilling and reduces operator effort. The autoclave is also set up for manual tank filling in case the fill pump does not work.\u003c\/p\u003e\n\u003cp\u003eChamber and load\u003cbr\u003eAll Tecno-Gaz autoclave chambers are built with special stainless steel. They are produced using advanced industrial systems and subjected to strict control and individual testing procedures.\u003c\/p\u003e\n\u003cp\u003eLoad and dimensions\u003cbr\u003eA parameter of great interest to buyers is the chamber volume, as it is used as the sole parameter to evaluate how much load the autoclave can sterilize.\u003cbr\u003eIn truth, we can find autoclaves with larger chambers than others, but with the capacity to sterilize a smaller amount of load. All this is determined by technical choices: heating system, heating element power, etc...\u003cbr\u003eAlways evaluate carefully not only the volume of the chamber but also and above all the load quantity declared by the manufacturers, which is normally around 750\/1,000 g per tray.\u003c\/p\u003e\n\u003cp\u003eRich standard equipment\u003cbr\u003eWe believe that every autoclave should be supplied with all the equipment needed to perform normal daily operations and those accessories needed for the management and control of the equipment itself. Therefore, Tecno-Gaz autoclaves are offered already complete with all possible accessories and preparations.\u003cbr\u003eIntegrated printer on all models: ensures the recording of sterilization cycles and allows for the formalization of the vacuum test.\u003cbr\u003ePreparation for water mains connection: all autoclaves are prepared for water mains connection via Pura.\u003cbr\u003eIncluded accessories: 1 closed tray holder, 4 aluminum tray holders, 1 dual-function key for tray extraction and door adjustment, water filling and drainage hoses, sponge for chamber cleaning.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical Characteristics:\u003c\/strong\u003e\u003cbr\u003ePower supply: 230V-50\/60 Hz\u003cbr\u003eExternal dimensions (mm): 510x590x390\u003cbr\u003eTray dimensions (W x H x D) (mm): 184 x 17 x 286\u003cbr\u003eWeight (kg): 54\u003cbr\u003eAbsorption: 1,700 W\u003cbr\u003eChamber dimensions (mm): Ø 245x320\u003cbr\u003eThermal printer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003cbr\u003e1 closed tray holder\u003cbr\u003e4 aluminum trays\u003cbr\u003e1 dual-use key for extracting trays and adjusting the door\u003cbr\u003e1 water filling and drainage hose and sponge for cleaning\u003c\/p\u003e","brand":"Tecno-gaz","offers":[{"title":"Default Title","offer_id":49814319628624,"sku":"ST0001534","price":3087.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0866\/3996\/8592\/files\/autoclave_b_evo.jpg?v=1740057264","url":"https:\/\/www.cfs.it\/en\/products\/autoclave-tecno-gaz-europa-b-evo-classe-b-15-lt","provider":"CFS Prodotti Medicali s.r.l.","version":"1.0","type":"link"}